Digital Monitoring Products XR20 User's Guide download pdf (Page 49)

Area Names

Your system areas are listed below:

Area Name Area Name

1. __________________ 2. ___________________

3. __________________ 4. ___________________

Service Department Phone:____________________

Emergency Phone: ___________________________

Central Station Phone: ________________________

Pager Direct™

Security Command™

Numeric Paging

Quick Reference Wallet Cards

PhoneAccess™ Quick Commands

Press For this action You will hear

Note: Zones

in a faulted

condition

are force

armed

when the

area arms.

# then 1 Arm all 3 short beeps

# then 2 Arm Perimeter 1 short beep

# then 3 Arm Perimeter/Interior 2 short beeps

# then 0 Disarm all areas 1 long beep

#, 5, 4, 0, n* Toggles the output

1 short beep = on

1 long beep = off

4 short beeps = restricted

* Use outputs 1, 2, 3, or 4 in place of n. Enter output descriptions below.

1. ________________________ 3. _________________________

2. ________________________ 4. _________________________