Digital Monitoring Products XR20 User's Guide download pdf (Page 32)

28 XR20 User’s Guide User Menu

Schedules

User Code Level: Master only.

Function: The Schedules function allows you to program the times

at which you normally turn your burglary protection on and off each

day of the week. This information can then be used by the system

to automatically arm or disarm the burglary protection.

Your system may be pre-programmed at installation to allow

automatic arming and disarming. When pre-programmed, you can

enter a schedule for the arming and disarming times.

You can also use the Closing Check/Extend feature with Schedules

to ensure your system is armed by an authorized user at a

specictime.Thisoptionsoundsthekeypadbuzzeranddisplays

CLOSING TIME! when a schedule expires. Users still on the

premises are required to arm the system or extend the schedule.

If the system is not armed, or the schedule not extended, a report

can be sent to the central station and/or a pager.

When a schedule expires and CLOSING TIME! displays, the keypad

next displays ENTER CODE: -. To silence the keypad buzzer and

extend the schedule for one hour, a user must either enter a valid

user code or present a card to the card reader.

Your system provides you with two different types of schedules:

Permanent schedules are used for automatic arming and disarming

and always occur at the same time until you change or delete

them.

Extend schedules allow an authorized user to extend the present

day's permanent scheduled closing time.

Permanent Schedules

User Code Level: Master only.

Use the following steps to set an arming or disarming schedule:

1. Access the User Menu.

2. Press the COMMAND key until SCHEDULES? displays. Press

any Select key. The keypad displays PRM EXT. Select

PRM.

3. The keypad next displays the day of the week you want

the schedule to start as SUN MON TUE WED. Press the

COMMAND key to show the remaining days of the week and

then Select your choice.

4. The keypad displays OPENING TIME?. Press COMMAND. The

keypad now displays MON – : AM PM. Enter the time you

want the burglary protection to be turned off. Use a 12 hour

clock only (12:00 to 11:59). Select AM or PM.

5. The keypad then displays CLOSING TIME?. Press the

COMMAND key. The keypad then displays MON – : AM

PM. If you want the schedule to be for consecutive days,

Select MON to increment the days of the week. When the

correct day is shown, enter the time you want the burglary

protection to turn on.

6. To clear a schedule, press DELETE and then AM when the

opening time is requested.

Press the Back Arrow key to exit the User Menu.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 51 52

Comments to this Manuals

No comments

Digital Monitoring Products XR20 User's Guide Page 32

Comments to this Manuals

Related products and manuals for Security access control systems Digital Monitoring Products XR20