Digital Monitoring Products XR20 User's Guide download pdf (Page 15)

Arming and Disarming XR20 User’s Guide 11

How Your System Operates

Your system has been programmed to operate in one of three

modes: Area, All/Perimeter or Home/Sleep/Away.

• Area — Your burglary protection is divided into up to four

areas. Each area can have a custom name, be turned on or

off independently of other areas, and limit access to only those

users with proper authority.

• All/Perimeter — Your burglary protection is divided into two

areas: Interior and Perimeter.

Perimeter arming is for when you are staying inside but want

the comfort of knowing the exterior doors and windows are

armed. Perimeter arming allows you to move freely about

inside without setting off any interior alarms.

All arms both the Perimeter and the Interior of the system. You

want to arm both of these areas when leaving the building and

no one is left inside.

• Home/Sleep/Away — Your burglary protection is divided into

two or three areas: Perimeter, Interior, and Bedrooms.

Home (Perimeter) arming is for when you are staying inside but

want the comfort of knowing the exterior doors and windows are

armed.

Sleep (Perimeter and Interior) arms all areas except those near

bedrooms and nighttime areas.

Away (Perimeter, Interior, and Bedrooms) arms all three areas

for when you leave the building and no one is left inside.

Regardless of which mode is programmed, much of the operation

is similar. Throughout this guide, any differences between the

systems are noted for your convenience.

Arming and Disarming

Arming Functions

Arming:Duringarming,thesystemveriesthatalldoors,windows,

and other protection devices to be armed are in normal condition.

If everything is normal, the system arms. If there is a problem on

one or more burglary zones, the keypad displays the problem and

allows you to correct the problem or bypass those zones.

If the problem can be corrected by closing a door or window, do

not bypass the zone. Instead, correct the problem and try arming

again. If the problem cannot be corrected, you can bypass the zone

or wait until the zone can be repaired by a service technician. A

bypassed zone is ignored by the system during the armed period.

In some cases the keypad might display FRONT DOOR - FAULT.

The keypad may then display PRIORITY ZONE, which is a zone that

cannot be bypassed. The problem on the zone must be corrected

before the system can be armed.

After making your arming selection, the keypad displays any zones

that are currently bypassed. These zones remain bypassed until

the system is armed and then disarmed. Any 24-hour zones in a

faulted condition also display.

Armed Message: After completing all bypasses or correcting zone

After completing all bypasses or correcting zone faults, the areas

selected are armed.

ForAll/PerimetersystemsthekeypadbrieydisplaysALL SYSTEM

ON if all areas in the system are arming or PERIMETER ON if only

selected areas are arming.

For Home/Away or Home/Sleep/Away systems the keypad displays

ALL SYSTEM ON if all areas in the system are arming, HOME MODE

ON or SLEEP MODE ON if only selected areas are arming.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Comments to this Manuals

No comments

Digital Monitoring Products XR20 User's Guide Page 15

Comments to this Manuals

Related products and manuals for Security access control systems Digital Monitoring Products XR20