Digital Monitoring Products XR20 Installation Guide download pdf (Page 7)

XRSuper6/XR20/XR40 Programming Guide

2500 N. Partnership Boulevard Springfield, MO 65803 www.dmpnet.com Digital Monitoring Products

1-INTRODUCTION

Introduction

1.1 Before You Begin

About this Manual

This manual provides programming information for the DMP XRSuper6/XR20/XR40 Command Processor

Panels. After this Introduction, the remaining sections describe the functions of each programming

menu items along with their available options. The XRSuper6/XR20/XR40 contains all of its

programming information in an on-board processor and does not require an external programmer.

Reading the Contents

Before starting to program, we recommend you read through the contents of this manual. The

information contained here allows you to quickly learn the programming options and operational

capabilities of the XRSuper6/XR20/XR40 panel.

In addition to this manual, you should also be familiar with the following XRSuper6/XR20/XR40

documents:

• XRSuper6/XR20/XR40 Installation Guide (LT-0624)

• XRSuper6

User's Guide (LT-0622)

• XR20

User's Guide (LT-0303)

• XR40 User's Guide (LT-0494)

• XRSuper6 Product Specification (LT-0443)

• XR20 Product Specification (LT-0301)

• XR40 Product Specification (LT-0491)

Programming Information Sheet

Included with each XRSuper6/XR20/XR40 panel is the Programming Information Sheet. This sheet lists

the various keypad prompts and available options for programming the panel. Before starting,

completely fill out the sheet with the programming options you intend to enter into the panel.

Having completed programming sheets available while entering data helps to prevent errors and can

shorten the length of time you spend programming. Completed sheets also provide you with an

accurate account of the panel's program you can keep on file for future system service or expansion.

The remainder of the Introduction explains starting and ending a programming session.

1.2 Getting Started

Ground Yourself Before Handling the Panel! Touch any grounded metal, such as the enclosure, before

touching the panel to discharge static.

Remove All Power From the Panel! Remove all AC and Battery power from the panel before installing

or connecting any modules, cards, or wires to the panel.

The XRSuper6/XR20/XR40 panel must be completely installed before you begin programming. Make

sure the panel is properly grounded, and the AC and battery wires are correctly installed.

Initializing the Panel

When programming an XRSuper6/XR20/XR40 panel for the first time or rewriting the entire program of

an existing XRSuper6/XR20/XR40, use the Initialization function described in section 2. Initializing

clears the panel's memory of any old data and sets the highest numbered user number to user code 99.

Program from any Keypad Address

You can program the XRSuper6/XR20/XR40 panel from any keypad connected to the keypad data bus.

See the XRSuper6/XR20/XR40 Installation Guide (LT-0624) for keypad addressing and installation

information.

Accessing the Programmer

To access the programmer function of the XRSuper6/XR20/XR40:

1.Place a slotted screwdriver across the two J16 reset jumpers for two seconds.

2.Remove the screwdriver.

3.Enter the code 6653 (PROG) into the keypad.

4.Enter your Lockout Code.

5.The keypad displays: PROGRAMMER.

INTRODUCTION

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

Comments to this Manuals

No comments

Digital Monitoring Products XR20 Installation Guide Page 7

Comments to this Manuals

Related products and manuals for Security access control systems Digital Monitoring Products XR20