Digital Monitoring Products 7073 Installation Guide download pdf (Page 10)

Digital Monitoring Products 7000 Series Keypad Installation Guide

7000 Series Keypad Installation Guide Digital Monitoring Products

7063 and 7073 User’s Guide

There are three different sections: Keypad Arming and Disarming, Keypad Door Strike, and Keypad Entry Delay. All

of the examples displayed assume that CLOSING CODE is YES in panel programming.

Note: Figures 9 through 12 show the user presenting their card to the keypad. When an external reader is

connected to a 7073 keypad, the user presents their card to the reader rather than to the keypad.

Keypad Arming and Disarming

Area system Arming and Disarming

Press CMD, the keypad displays ARM DISARM. Press the Select key under either option. The keypad displays ENTER

CODE: -. Present your card to the keypad or to an external reader connected to the 7073 keypad. Once validated

by the system, all areas assigned to your code arm or disarm automatically and the 7073 keypad Door Strike relay

activates.

ABC SECURITY

ARM DISARM

ABC SECURITY

ENTER CODE: –

ABC SECURITY

ALL? NO YES

Select NO to arm or disarm individual areas.

Select YES, or simply wait, to automatically arm or disarm all areas for which you are authorized.

Figure 9: Area Arming and Disarming

All/Perimeter System Arming and Disarming

Press CMD, the keypad displays PERIM ALL (when

arming) or DISARM?. Press the Select key under the

desired option. The keypad displays ENTER CODE: -.

Present your card to the reader. Once validated by

the system, the selected areas arm or disarm

automatically. On 7073 keypads, the Door Strike

relay then activates.

Home/Away System Arming and Disarming

Present your card to the reader. If the system is

armed, once the card is validated, all areas are

disarmed. If the system is disarmed when you

present your card, once the card is validated, all

areas are armed in the AWAY mode.

Keypad Door Strike

Area and All/Perimeter Door Strike

From the Status List, present your card to the reader. Once the system validates the card, the Door Strike relay

activates. Home/Away systems only activate the 7073 Door Strike relay when arming and disarming.

ABC SECURITY

MON 10:20 AM

While the keypad displays the

Status List, present your access card.

Typically, the relay activates for 5 seconds during which

time you can open the door. Once you open the door,

you have 40 seconds to exit and close the door before

the Zone 2 Soft-Shunt expires.

Figure 11: Present Access Card

PERIM ALL

DISARM?

The system arms or disarms the areas

and activates the door strike relay only on the 7073 keypad.

Figure 10: All Perimeter Arming and Disarming

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Digital Monitoring Products 7073 Installation Guide Page 10

Comments to this Manuals