Digital Monitoring Products 7173 Installation Guide download pdf (Page 38)

Digital Monitoring Products XR500 Series Installation Guide

ComPlIanCe

27.4 Mercantile Safe and Vault

When the DMP Model 350A housing is used, the XR500 Series provides operation as a mercantile safe and vault alarm.

Bell Supervision and wiring must be in accordance with ANSI/UL 681. When the XR500 Series is mounted outside the

safe or vault, tamper protection and the Sentrol Model 5402 or Potter EVD listed vibration detectors should be used.

27.5 Bell

A local audible signal appliance must be used such as Ademco AB12M bell and bell housing.

27.6 Bank Safe and Vault (XR500N/XR500E only)

In addition to the requirements for Mercantile Safe and Vault in section 26.4, the following must be done for

Bank Safe and Vault systems. The Bank Safe and Vault option must be programmed as YES. See the XR500 Series

ProgrammingGuide(LT-0679).The72hourbatterystandbymustbeprovided.ARothenbuhlerModel5110High

Security Bell must be used. See section 32.6 wiring diagram.

27.7 Wireless Audible Annunciation Option

The Wireless Audible option must be selected as ANY for commercial applications.

ANSI/UL 294 Specications

Access Control System Units

28.1 Panel Designation

The XR500 Series panels are designated stand alone units.

28.2 Tamper Protection

ForlistedAccessControlinstallations,atamperswitchmustbeused.

28.3 Compatible Devices

The following devices are compatible with the XR500 Series panels.

Access Control

733 Wiegand Interface Module Proximity reader connector

734 Wiegand Interface Module Proximity reader connector

OP-08CB Motion Detector Infrared sensor

* PB-2 REX Button Exit control push button

PP-6005B Proxpoint Plus® Reader Proximity reader

MP-5365 Miniprox® Reader Slimline proximity reader

PR-5455 ProxPro® II Reader Long range reader with sounder

MX-5375 Maxi-Prox™ Reader Long range reader compatible with 1351 Prox Pass

* This device has not been investigated and shall not be used in listed installations.

Universal Fire Alarm Specications

29.1 Introduction

Theprogrammingandinstallationspecicationscontainedinthissectionmustbecompletedwheninstallingthe

ModelXR500SeriesinaccordancewithanyoftheANSI/ULorNFPArestandards.Additionalspecicationsmaybe

required by a particular standard.

29.2 Wiring

AllwiringmustbeinaccordancewithNEC,ANSI/NFPA70.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

No comments

Digital Monitoring Products 7173 Installation Guide Page 38