Digital Monitoring Products 7173 Installation Guide download pdf (Page 10)

Digital Monitoring Products XR500 Series Installation Guide

IntRoduCtIon

Panel Features

2.1 Description

TheDMPXR500SeriesCommandProcessor™Panelisaversatile12VDC,combinedaccesscontrol,burglary,andre

communicator panel with battery backup. The XR500 Series provides eight on-board burglary zones and two on-board

12 VDC Class B powered zones. The powered zones have a reset capability to provide for 2-wire smoke detectors,

relays, or other latching devices. The XR500 Series can communicate to one or two DMP SCS-1R Receivers using

digital dialer or network communication, or to non-DMP receivers using the Contact ID format.

2.2 Zone Expansion

Up to 574 additional zones are available on the XR500 Series using DMP LCD keypad remote zone capability and

zone expansion modules. The panel keypad data bus supports up to sixteen supervised device addresses with each

address supporting up to four programmable expansion zones.

Up to 500 zones are available using the on board LX-Bus, Model 461 Interface Adaptor with 481, 462N, 462P and 472

Interface Cards, and any combination of single, four, eight, or 16-zone expansion modules and single-zone LX-Bus™

detectors.

Note: Do not use shielded wire for LX-Bus or Keypad Bus circuits.

2.3 Output Expansion

In addition to the two SPDT relays and four open collector outputs on the XR500 Series, you can also connect up to

25 Model 716 Output Expansion Modules to each LX-Bus. These modules can provide an additional 500 programmable

SPDT relays.

The XR500 Series provides 100 Output Schedules you can use for programming the 716 to perform a variety of

annunciationandcontrolfunctions.Youcanalsoassignthe716outputstoanypanelOutputOptionssuchasFire

Alarm,CommunicationFail,orPhoneTroubleOutputs.Refertothe716InstallationGuide(LT-0183).

TheLX-Bus™alsosupportstheModel717GraphicAnnunciatorModule.Each717modulesupplies20switchedground

outputs that follow the state of their assigned zones.

Note:The717supportsthersteightKeypadBusaddresses.TofollowKeypadBusaddressesninethrough16,install

multiple716modules.Refertothe717InstallationGuide(LT-0235)and716InstallationGuide(LT-0183).

2.4 Central Station Communication

You can program the XR500 Series panel for reporting to one or two DMP SCS-1R Receivers using digital dialer or

network communication. The panel can also communicate to non-DMP receivers using the Contact ID communication

format. The XR500 Series connects at the premises to a standard RJ31X or RJ38X telephone jack. Use the DMP 893A

DualPhoneLineModulewhenconnectingtheXR500Seriespaneltotwoseparatephonelinesinreorburglary

applications.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 53 54

No comments

Digital Monitoring Products 7173 Installation Guide Page 10