Digital Monitoring Products 7060A Installation Guide Page 14
- Page / 28
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
12 LCD Keypad Installation Guide
LCD Keypad Installation Guide 13
ZONE 2 SOFTSHUNT
TIME: 40
Zone 2 Soft-Shunt Time
(7073/7073A, 793 only)
Enter the number of Soft-Shunt seconds to elapse
before the Soft-Shunt timer expires. Range is from
20 to 250 seconds. Press any top row select key
to enter the number of seconds. Once the door
strike relay is activated, the user has 5 seconds
to open the door connected to zone 2. The zone
is then shunted for the programmed time or until
the contact restores to normal. Ten seconds after
the Soft-Shunt entry/exit time begins, the keypad
beeps if the door is still open. If the door remains
open when the timer expires a zone open/short
is sent to the panel for Zone 2. The default is 40
seconds.
Figure 7 shows how the Soft-Shunt works using
the default 40 second timer.
5 Second
Strike
40-Second "Soft-Shunt"
and entry/exit timer.
At 30 seconds
,
the keypad beep
s
if door is still open.
End of
timer.
40
Sec
onds
A zone fault is indicated
if door is still open.
Figure 7: Door Strike Relay Operation Time Line
RELOCK ZONE 2
FAULT: NO YES
Relock on Zone 2 Fault?
(7073/7073A, 793 only)
Selecting NO leaves the relay on when Zone 2 faults
to an open or short condition during door access.
Selecting YES turns the relay off when Zone 2 faults
open or short during door access. The default is
NO.
- INSTALLATION GUIDE 1
- DMP Keypads 3
- Installing the Keypad 4
- Harness Wiring 4
- – Zone 1 5
- Additional Power Supply 6
- Keypad Bus Monitor 6
- Card Readers 6
- Wiring the 333 Suppressor 7
- Door Strike Relay 7
- Operation 7
- 8
- 8
- 8
- Internal Speaker Operation 9
- Backlighting 9
- End-User Options 9
- Backlighting Brightness 10
- Internal Speaker Tone 10
- Internal Volume Level 10
- Model Number 10
- Keypad Address 10
- Special Character 11
- First Letter 11
- Second Letter 11
- Third Letter 11
- Keypad Options (KPD OPT) 12
- Keypad Mode 12
- Default Keypad Message 13
- Arm Panic Keys 13
- 7/0 Panic 13
- Zone 2 Soft-Shunt Time 14
- (7073/7073A, 793 only) 14
- Relock on Zone 2 Fault? 14
- Site Codes 5-8 18
- Number of User Code Digits 18
- Degraded Mode 19
- Additional Programming 21
- User’s Guide 22
- Keypad Arming and Disarming 22
- Keypad Door Strike 23
- Keypad Entry Delay 23
- FCC Information 24
- Wiring Specications 25
- Keypad Specications 26
- Specications 27
- Compatibility 27
- Listings and Approvals 27
- Accessories 27
- LT-0883 (5/06) 28
Related products and manuals for Numeric keypads Digital Monitoring Products 7060A
(65 pages)LG XC12U manuály
Uživatelské manuály a uživatelské příručky pro Audio LG XC12U.
Poskytujeme 4 manuály pdf LG XC12U ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Comments to this Manuals