Digital Monitoring Products XR20 User's Guide download pdf (Page 19)

User Menu

Zone Monitor

User Code Level: Master and Standard.

Function: Allows the system to monitor selected disarmed zones

(doors, windows, or motion detectors). When a monitored zone is

tripped, the keypad sounds a tone and displays the zone name. This

is an ideal feature for monitoring door zones to tell when someone

comes in or goes out.

You can place any combination of disarmed zones in Zone Monitor

but only the most recent zone tripped is displayed. The displayed

zone name clears automatically after a short time or when the zone

is armed.

Zone Monitor does not function while the system is armed but a zone

placed into it will still be monitored when the system is disarmed.

Using Zone Monitor as part of your weekly system test: After

using the System Test function (see page 16), place all perimeter

and interior zones in Zone Monitor. Starting at the front door, go

around and open and then close each door and window. You should

hear the keypad beep each time. The keypad will also display the

name of each zone as its device is opened.

Once all protected doors and windows have been tested, walk in

front of each motion detector. The keypad should beep to confirm

their operation. If at any time during your weekly testing a device

does not cause the keypad to beep, call the service department for

assistance.

Using the Zone Monitor Function

1. Access the User Menu.

2. Press the COMMAND key until ZONE MONITOR? displays.

3. Press any one of the SELECT keys.

The keypad displays PERIM ALL NBR .

4. Select PERIM to place all disarmed perimeter zones into Zone

Monitor. PERIM is displayed only on All/Perimeter and Home/

Away systems.

4a. The keypad displays PERIM? ADD RMV.

4b. Select ADD to add all perimeter zones to Zone Monitor.

4c. Select RMV to remove all perimeter zones.

5. Select ALL to place all disarmed perimeter and interior zones

into Zone Monitor.

5a. The keypad displays ALL? ADD RMV.

5b. Select ADD to add all disarmed zones to Zone Monitor.

5c. Select RMV to remove all disarmed zones.

6. Select NBR to enter a specific zone number for zone monitor.

7. If NBR is selected, the keypad displays ZONE : - ADD RMV.

7a. Enter any zone number and select ADD to add this zone.

7b. Enter any zone number and select RMV to remove the zone.

8. The zone number automatically disappears and a new zone

number can then be entered in step 7a.